Skip to content

Photo: Bru-nO / Pixabay

Gear04 MIN·17.11

Ducking Explained: How Sidechain Compression Became the Sound of Dance Music

It started as a studio trick to stop a bass drowning a kick. Three decades later, the pump is a genre signature. Here’s how it works, how to hear it and when to break the rules.

Selected by Freja Fagerström

Listen closely to almost any dance record made in the past 25 years and you will hear something breathing. The pads swell between kicks, the bass dips and recovers, and the whole track seems to inhale on the offbeat. That is sidechain compression, and it is the reason this magazine is named what it is.

What it actually does

A normal compressor listens to its own input. When the signal gets louder than a set threshold, the compressor turns it down. Sidechaining redirects that listening: the compressor is told to watch a different signal, usually the kick drum, and to turn down the sound it is processing whenever the kick hits.

The result is a sound that ducks out of the way. Put the compressor on the bass, trigger it from the kick, and each time the kick lands the bass gets quieter for a fraction of a second, then swells back. The kick and the bass stop fighting over the same low frequencies, and the kick punches through even when the mix is very loud.

There are four controls worth understanding:

  • Threshold: how loud the kick must be before ducking begins
  • Ratio: how much the level drops. High ratios give a deep duck; low ratios give a gentle ripple
  • Attack: how quickly the duck begins. Fast attacks clamp down instantly
  • Release: how long the sound takes to recover. This sets the groove

Release is the one that matters most. At 124 BPM, a beat lasts about 484 milliseconds. A release of around 200 ms lets the sound recover well before the next kick, so the pump sits tightly on the beat. Stretch it to 400 ms and the bass never fully returns, producing the heavy, swaying feel of a certain strand of tech house.

A short history of the pump

The technique began as a broadcast and studio utility. Engineers used it for ‘voice-overs’ on radio, where the music automatically dips when the presenter speaks. In the 1990s, French and British producers realised the same circuit could make a rhythm. The effect was widely noticed as a feature rather than a fix by the early 2000s, when it turned up on chart records, often exaggerated into an almost cartoonish wobble.

The veteran mastering engineer Leopold Maundrell, who has worked on some 3,000 club releases, remembers the moment it flipped. ‘In 2003 we’d get tapes where the producer had pushed it so far you’d get seasick, and we’d gently ask them to back off. By 2008 they were asking us to put more in.’

THE DROP · From the crate: The Eight-Hour Mix: Why Marathon Sets Are Quietly Taking Over Streaming · Photo: Gigxels / Pixabay

‘In 2003 we’d ask them to back off. By 2008 they were asking us to put more in.’

Doing it without a compressor

A modern producer does not need a hardware unit. Many use a volume-shaping plug-in, which draws the duck as a curve and fires it on every beat regardless of whether a kick is present. It sounds the same, is more predictable, and lets you ride the shape by eye.

There are trade-offs. A true sidechain responds to the actual kick, so if you drop a beat or play a syncopated pattern, the ducking follows. A drawn curve is rigid and ducks whether the kick is there or not. Many producers deliberately use both, one for strict rhythm and one for the elastic response of a real compressor.

When not to use it

The common mistake is applying it to everything. Duck every layer by the same amount and the track goes flat; the dynamics lose their meaning because everything moves together. Experienced engineers duck selectively. The bass takes the deepest cut, since it shares the kick’s frequencies. Pads get a lighter duck. Hi-hats and vocals are usually left alone.

From the crate: The Last Field: Can the Mid-Sized Festival Survive 2027? · Photo: OrnaW / Pixabay

Another trick is to duck only part of the spectrum. A multiband sidechain lowers just the low end of a pad when the kick hits, leaving its shimmer on top untouched. The kick opens up, and the pad still sounds full.

Some producers go the other way and use the effect as a hook. The Brussels producer Mathilde Montrelle built an entire 2024 EP on what she calls ‘audible ducking’, with the pump so extreme that the chords become a rhythm of their own. ‘I stopped treating it as a mix tool,’ she told us. ‘It’s an instrument. You play it.’

How to hear it

Try this at home. Take any club track and listen only to the sustained sound underneath, a pad or a bass note. Do you hear it getting softer on each beat? Count ‘one, two, three, four’ and notice whether the dip falls exactly on the count. If so, you are hearing the compressor at work.

Once you can hear it, you cannot unhear it. That’s rather the point of the thing. A kick drum, after all, deserves everything else in the track stepping aside for it.

Taggedsidechainproductioncompression
Pass it on
The selector
Freja Fagerström
Senior Correspondent

Freja covers club culture and nightlife policy, with a background in local radio and city-council reporting. She is based in Stockholm.

Every track by Freja →

Conversation (…)

Be civil. Comments are public.

    Mixed into